EPC Path
Notes ·

EPC Cost Cap Exemption: When Upgrades Exceed the Limit

Required spend, capped at£10,000Penalty if you let it anyway£30,000per property, per breach — and the property cannot be let

When the cost of bringing a rental property to the required energy standard exceeds the statutory cap, landlords may register an exemption. The cap under the new regulations is £10,000 per property. Once registered, the exemption allows continued letting without meeting the full standard, but only for a defined period and under specific conditions that require careful assessment.

What is the EPC cost cap exemption?

The cost cap exemption exists to protect landlords from disproportionate expenditure. If achieving compliance would cost more than £10,000 per property, and you have obtained quotes demonstrating this, you may apply to register the property as exempt. The exemption does not remove the obligation entirely—it defers it until the exemption expires or circumstances change.

To qualify, you must gather evidence showing that all relevant improvement measures recommended for the property, when combined, exceed the cap. The assessment must be based on quotes from appropriately qualified installers for work that would achieve the fabric-first dual metric required from 1 October 2030.

The exemption applies only if no combination of measures below the cap would achieve compliance. If one installer quotes above the cap but another quotes below it, the exemption will not hold. The onus is on the landlord to demonstrate that compliance genuinely cannot be achieved within the financial limit.

What costs count towards the cap?

Only improvement measures that contribute directly to meeting the new standard count towards the cap. This includes insulation, glazing upgrades, heating system replacements, and smart-readiness measures—the fabric-first dual metric components outlined in the MEES 2030 standard.

Routine maintenance does not count. Repairing a broken boiler, fixing damaged window frames, or repointing brickwork are landlord responsibilities regardless of energy performance. The cap covers only the incremental cost of upgrading to a compliant standard beyond what maintenance alone would require.

Professional fees for assessments, surveys, and certification are included. If you need a structural engineer to confirm wall insulation is feasible, or an architect to design compliant window replacements in a conservation area, those costs contribute to the cap. Installation labour, materials, and associated enabling works such as scaffolding or temporary heating all count.

Costs incurred in obtaining quotes do not count towards the cap itself, but they are necessary to evidence the exemption. You cannot claim an exemption based on estimates alone; formal written quotations are required.

How long does the exemption last?

The duration depends on the type of exemption registered. A cost cap exemption typically lasts for five years from the date of registration. After five years, you must reassess the property. If costs have fallen, new technologies have emerged, or grant funding has become available, you may no longer qualify for renewal.

Other exemption types carry different durations. A seven-year exemption applies where a tenant refuses consent for works, provided you have documented evidence of the refusal and have made reasonable efforts to gain agreement. Wall insulation exemptions, granted where installation would devalue the property or cause unacceptable aesthetic harm, also last seven years.

All exemptions expire if the property is sold or if a new tenancy begins more than six months after the previous one ended. The exemption does not transfer to a new owner, and significant gaps in letting require re-registration. If you check a postcode and discover your property falls below the threshold, the exemption clock may already be ticking.

Which exemption types exist beyond cost?

The cost cap is the most common exemption, but others recognise practical or legal barriers. The consent exemption applies when a tenant, superior landlord, or third party with a legal interest withholds permission for necessary works. Mortgage lender refusal can also qualify, provided the refusal is documented and reasonable efforts were made to find alternative finance.

Devaluation exemptions protect landlords where improvement works would reduce the property's market value by more than five per cent. This typically applies to listed buildings, properties in conservation areas, or homes where external wall insulation would fundamentally alter character. A formal valuation from a qualified surveyor is required.

New landlord exemptions allow six months from acquisition before compliance is required. This recognises that purchasing decisions are often made without full knowledge of energy performance, and immediate works may be impractical. The exemption is brief and does not renew.

Each exemption type requires specific evidence and must be registered on the official exemptions register before relying on it. Registration is not automatic, and letting without a valid exemption risks penalties up to £30,000 per property, per breach.

When is spending beyond the cap the right decision?

Registering an exemption may defer the problem but rarely solves it. If you plan to hold the property long-term, spending beyond the cap now often costs less than repeated exemption applications, market-value erosion, and eventual forced compliance under tighter future standards.

Properties below the threshold face rental demand headwinds. Across London's 33 boroughs, 1,372,675 properties out of 3,029,602 on the register sit below band C. As compliant stock grows, tenants increasingly favour efficient homes with lower running costs. A property stuck at band E risks longer void periods and downward rent pressure regardless of exemption status.

The grandfathering gate at 1 October 2029 rewards early action. A certificate at band C or better—meaning a SAP score of 69 or above—lodged before that date remains valid for the certificate's 10-year lifetime from lodgement, even if the property would not meet the fabric-first dual metric. Achieving SAP points to band C before the gate closes buys a decade of certainty.

Calculate the exemption cycle cost: registration fees, re-assessment every five years, potential rent loss, and the likelihood that improvement costs will rise rather than fall. In areas such as W3 6 or E1 0, where demand for efficient homes is high, spending beyond the cap to secure long-term compliance often delivers better returns than relying on repeated exemptions.

The exemption is a safety valve, not a strategy. It exists for genuine hardship cases, not as a route to indefinite non-compliance. For most portfolios, the question is not whether to upgrade, but when and in what order. The cost cap exemption defers the decision; it does not remove it.

This analysis draws on the UK government response to the consultation "Improving the energy performance of privately rented homes" and Open Government Licence v3.0 datasets covering EPC registers. Full consultation details are available at https://www.gov.uk/government/consultations/improving-the-energy-performance-of-privately-rented-homes-2025-update.

Common questions

How much can I spend before claiming a cost cap exemption?

You may claim a cost cap exemption when the total cost of all relevant improvement measures exceeds £10,000 per property. You must provide written quotes from qualified installers to evidence that compliance cannot be achieved within the cap.

Does the cost cap exemption expire?

Yes, a cost cap exemption lasts for five years from registration. After five years you must reassess the property and may need to reapply if costs remain above the cap and compliance is still not achieved.

Can I register an exemption and continue letting indefinitely?

No. Exemptions have fixed durations and expire when the property is sold or if a new tenancy begins more than six months after the previous one ended. They defer compliance, they do not eliminate the requirement.

What happens if I let a property without a valid exemption?

Letting a non-compliant property without a registered exemption can result in penalties up to £30,000 per property, per breach. The exemption must be formally registered before you can rely on it.

Do maintenance costs count towards the cost cap?

No. Routine maintenance such as boiler repairs or window frame fixes does not count. Only the incremental cost of upgrading to meet the energy standard—insulation, glazing, heating, and smart-readiness measures—counts towards the £10,000 cap.

Check your own stock

Enter a postcode to see how much of the local stock sits below band C, or send us the list and we will come back with the order of work.

More notes